HCX-23 Derrick for1800m vertical drilling and 1600m inclined drilling

Feature

1. The derrick is well-structured with its story height of 1.7m. Its single piece is light. It is convenient to install in short time.
2. It has large load capacity. It can be used to the 1800m vertical drilling and 1600m inclined drilling.
3. The HCX-23 derrick is adaptable. And its steel pedestal can be applied to various vertical drilling rigs from 1500m-2400m.
4. It covers less and thus its cost of excavation and ground-leveling is low. It is suitable for the mountain area.

Specification

Nominal Height of Drilling Tower	23m
Max. Static Load of Crown Block	320 Kn
Length of Stand	4×4.5 or 6×3
Inclined Angle	75-90°
Nominal Area of Pedestal	7.32m ×5.572m
Number of Crown Block	3
Max. Load of Hanging Cage	0.8 Kn
Weight	7500kg

HYDX-6
This HYDX-6 hydraulic drilling rig is a new product made by Lianyungang Huanghai Machinery. It is a thoroughly new-typed drilling rig developed on the basis of the advanced techniques in the world. HYDX-6 is reasonable in design, excellent in performance, easy for operation and convenient for mainte...

Tag: Spindle Type Core Drilling Rig With Tower | Geotechnical Core Drilling Rig With Tower | Drilling Rig Machine | Underground Core Drill Rig

XY-44A
As a spindle type drilling rig, the XY-44A core drill rig takes diamond bit or tungsten-carbide -tipped bit is aligned with a water brake. It is fed with double cylinders that travel much longer. Its oil is supplied in two opposite directions by hydraulic spider disk with a hydraulic lock. It is wid...

Tag: Spindle Type Core Percussion Drilling Rig | Truck Mounted Spindle Type Core Drill Rig | Spindle Type Diamond Core Drill Rig | Spindle Wireline Core Drilling Rig